Repair of car body elements Peugeot 206

General information about the car body
The body is made from stamped and welded parts, including crumple zones in the front and rear of the body and the center section. The car is produced with two types of bodies: a convertible and a hatchback, which is...

Car body and interior care
The condition of the bodywork should be checked regularly. Otherwise, corrosion of individual areas can lead to severe damage and later costly repairs. It is very important to pay attention to parts of the body that are...

Removal and installation of a forward bumper
Remove the front bumper in the following order: open the hood; Pic. 11.1. Removing the radiator cover: 1, 3 - mounts; 2 - upper part of the cladding; 4 - bolt; 5 - radiator lining remove fasteners 1 (pic. 11.1); remove...

Replacing the front bumper deflector
Replace the front bumper deflector in the following order: put the car on a lift; Pic. 11.5. Removing the deflector: 1 - clamps; 2 - deflector remove clips 1 (pic. 11.5); remove deflector 2; Pic. 11.6. Drilling holes in...

Removal and installation of a forward wing
Remove the front wing in the following order: open the hood and fix it; remove the radiator cover (upper and lower parts); remove headlight; Pic. 11.7. Removing the mudguard: 1, 2 - fastening elements remove fasteners 1...

Removal and installation of a cable of opening of a cowl
Remove the hood opening cable in the following order: pull the hood release lever; Pic. 11.12. Hood lock: 1 - interior decoration; 2 - bolt; 3 - lever remove interior trim 1 (pic. 11.12); unscrew bolt 2; move the lever...

Removal and installation of a back bumper
Remove the rear bumper in the following order: put the car on a lift; Pic. 11.40. Removing the rear bumper: 1, 2 - fastening elements; 3 - pin connector remove items 1 (pic. 11.40) rear bumper mounts; lower the lift;...