- open the hood and fix it;
- remove the radiator cover (upper and lower parts);
- remove headlight;
Pic. 11.7. Removing the mudguard: 1, 2 - fastening elements
- remove fasteners 1 and 2 (pic. 11.7) mudguard;
- remove the mudguard;
- disconnect the turn signal repeater lamp on the wing;
- open the door;
Pic. 11.8. Removing the fender mount from the inside: 1 - fastening element
- unscrew fastener 1 (pic. 11.8) from inside the wing;
Pic. 11.9. Rear wing bolts: 1 - bolts
- unscrew bolts 1 under the hood (pic. 11.9) wing mounts;
- remove the hood bar;
Pic. 11.10. Front wing bolts: 1 - bolts
- unscrew the upper front bolts 1 (pic. 11.10) wing mounts;
- remove the wing by lifting it up;
- push the bumper down and remove the fender.
Install the front wing in the following order:
- apply a layer of mastic for gluing and sealing body parts between the inner wing panel and the wing opening;
Pic. 11.11. Front fender installation: A - emphasis
- insert the wing into the center stop A (pic. 11.11);
- complete installation in the reverse order of removal, adjusting and leveling it at the top;
- check the functionality of the electrical equipment.