Pic. 1.121. The use of oils depending on the operating conditions
Pic. 1.122. Checking the oil level with an oil dipstick: A - maximum oil level; B - minimum oil level
Pic. 1.123. Tire swap pattern
All vehicles are equipped with a service interval display integrated in the instrument cluster (pic. 1.118, 1.119, 1.120, 1.121, 1.122, 1.123), with seven indicators. The service interval indicator has a pointer «wrench» in the first rank.
Pic. 1.118. Maintenance indicator
Each time the ignition is turned on, the wrench symbol lights up on the display panel for 5 seconds and the mileage to the next maintenance is displayed, for example «4800 km» (see fig. 1.118).
After 5 seconds, the display switches to the normal mileage display mode in km (general and daily).
Pic. 1.119. Meter reading (if the next maintenance is less than 1000 km away)
If the next service is less than 1000 km away, the display shows the symbol «wrench» more brightly and remains constantly lit, while the daily and total mileage counters work in normal mode (pic. 1.119).
If the next maintenance period is missed, the indicator flashes for 5 seconds, showing the symbol «wrench» and mileage after the next MOT.
After 5 seconds, the display switches to the normal mileage indication mode (general and daily).
After passing the next TO at the service station, the counter is set to zero. To set the counter to zero yourself, do the following:
- turn off the ignition;
Pic. 1.120. Service counter setting button
- press and hold button 1 (pic. 1.120);
- turn on the ignition, the odometer will start counting down (about 10 s);
- keep the button pressed until the display shows «0», and the symbol «wrench» will go out.
To set the due date for the next maintenance, do the following:
- turn off the ignition;
- press the daily run button and hold it;
- turn on the ignition and immediately release the button, an arbitrary mileage value will appear on the display;
- by pressing the mileage reset button, select the desired mileage until the next MOT;
- hold the button until the information on the display stops flashing;
- release the button and turn off the ignition.