- remove the air filter assembly;
Pic. 6.107. Disconnecting the control rod: 1 - bolt; 2 - clamp; 3 - ball bearing element
- remove element 3 of the ball joint (see fig. 6.107) and clamp 2;
Pic. 6.118. Removing the center console: 1 - center console; 2 - handle
- remove handle 2 (pic. 6.118) selector lever;
- remove the central console 1;
Pic. 6.119. Removing the selector grille: 1 - switches; 2 - connector support; 3 - lattice
- remove support 2 (pic. 6.119) connector;
- remove switches 1 and a lattice 3 selector;
Pic. 6.120. Fastening of the gearbox control mechanism: 1 - bolts; 2 - nuts
- unscrew bolts 1 (pic. 6.120) and nuts 2;
- raise the car on a lift;
- remove the exhaust pipe hanger;
- remove the heat shield back and remove the gearbox control mechanism.
Pic. 6.121. Installing the gearbox control mechanism: 1 - ball bearing; 2 - lever; 3 - fixture
Install the gearbox control mechanism in the reverse order of removal. To fix the ball joint 1 (pic. 6.121) it is necessary to rest against a point under the lever 2 of a gear change by means of adaptation 3. Adjust a drive of a gear change.