Dismantle the gearshift mechanism in the following order:
Pic. 6.92. Gear Shift Mechanism: 1 - a rod of a fork of inclusion of the 3rd and 4th gears; 2 - fork of inclusion of the 3rd and 4th gears; 3 - fork reverse gear; 4 - leash of the reverse fork; 5 - leash of the fork of inclusion of the 1st and 2nd gears; 6 - leash for the 5th gear and reverse fork; 7 - fork reverse gear; 8 - retaining ring; 9 - spring; 10 - 5th gear fork rod; 11 - 5th gear engagement fork
- remove spring 9 (see fig. 6.92);
- remove the retaining ring 8;
Pic. 6.93. Reversing lever: 1 - pin; 2 - axis; 3 - reverse gear
- press in spring pin 1 (pic. 6.93);
- take out an axis 2 leashes of inclusion of a backing.
Attention! The axle and reverse gear must be replaced as a set, since the pin hole is drilled as a set.
Assemble the gearshift mechanism in the reverse order of disassembly.