Removing
Disconnect the battery.
Remove trim (1).
Release the latches (2) and remove the side trim of the left console (3).
Detach the mount (5) and remove the side trim of the right console (4).
Left-hand side
Rotate the air temperature sensor (6) ¼ turn to the left to disengage it from its support 3 (in the direction of the arrow «A»).
Remove the air intake temperature sensor (6) (in the direction of the arrow «b»).
Cut the original wire harness.
Connect the new wiring harness with the grommet.
Note. Repair of wires must be carried out using hot-melt bushings and insulating sheaths.
Right side
Rotate the air temperature sensor (7) ¼ turn to the left to disengage it from its support 3 (in the direction of the arrow «With»).
Remove the air intake temperature sensor (7) (in the direction «d»).
Cut the original wire harness.
Connect the new wiring harness with the grommet.
Note. Repair of wires must be carried out using hot-melt bushings and insulating sheaths.
Installation
Install the parts in reverse order.