Loosen and move aside the high current fuse box (3).
Remove the following components:
- air deflector;
- air resonator;
- air supply tube;
- protective battery cover;
- battery;
- battery tray;
- protective shield under the engine.
Unplug electrical power connector (in the zone «A»).
Loosen the nut (8) and bolts (7).
Remove the starter (9) (remove over the gearbox).
Attention. When installing, check for the presence of the center pin.
Install starter (9).
bolts (7) tighten to 20 Nm.
Nut (8) tighten to 16 Nm.
Install the parts in reverse order.