Identification
Tightening method
Outlet pipe mounting method
Note. Observe the precautions to be taken before starting work.
The front pipe must be protected from any external mechanical influences and must not come into contact with corrosive substances. Do not deform the front tube more than 20°in the angular direction (X), 20 mm axially and 25 mm offset (Y) (front tube removed).
The front tube must not be deformed more than 3°in the angular direction (X), 0 mm axially and 3 mm offset (Y) (front pipe installed).
Attention. Failure to follow these precautions will result in reduced front pipe life. Disconnecting or removing the exhaust pipe is essential when performing operations that require lifting the power package.