Remove the protective shield under the engine.
Disconnect:
- gasoline vapor collection tube (on the intake manifold) in the zone «b»;
- gasoline vapor collection tube (on the canister bleed solenoid valve) in the zone «With».
Disconnect the electrical connector of the canister bleed solenoid valve (in the zone «d»).
Loosen the solenoid valve (1) in the zone «A» and take it off.
Install the parts in reverse order.
Connect the battery.
Attention. It is not recommended to dismantle the motorized throttle body by yourself. The unit cannot be repaired and is adjusted only with the help of special diagnostic equipment.