Note. To remove the solenoid valve (2) or actuator (3) the air filter housing needs to be removed.
Withdrawal (exhaust side regulator solenoid valve)
Disconnect the battery.
Disconnect the connector in the area «A».
Note. When removing, use a rag to protect the equipment from oil escaping from the hole.
Remove the bolt (4) and remove the solenoid valve (1).
Note. Clean the sensor installation area to ensure tightness and check for impact marks and scratches.
Timing actuator (petrol engines 1.4 and 1.6 l):
1 - solenoid valve of the timing phase control system (release);
2 - electromagnetic valve of the timing control system (inlet);
3 - camshaft actuator.
Withdrawal (intake regulator solenoid valve)
Disconnect the battery. Loosen the bolts (5) And (7). Remove the air deflector (10) and resonator (11).
Remove the bolt (8) and remove the air intake connector (9). air filter cover (6) and filter element.
Turn away bolts (13) and remove the intermediate filter bracket (12). air filter housing (14) and air intake manifold (15).
Note. Remove the air filter housing between the battery and engine.
Disconnect the connector in the area «b».
Note. When removing, use a rag to protect the equipment from oil escaping from the hole.
Remove the bolt (16) and remove the solenoid valve (2).
Note. Clean the sensor installation area to ensure tightness and check for impact marks and scratches.
Install the previously removed parts in reverse order.
Removing the timing actuator Perform the operations described in chapter «Withdrawal (regulator solenoid valve (2), inlet)». Disconnect the actuator connector in the area «With».
Turn away bolts (17) And. turning actuator (3) around the axis in the zone «With» with a key «Allen 4» (counterclockwise direction), remove it.
Remove the seal (18).
Install the parts in reverse order.
Connect the battery.