Attention. Poor adjustment can lead to difficult shifting.
Remove the center console (see corresponding operation).
Place the shift lever in neutral position.
Unfasten the gearshift hinge (2).
Do the following at the same time:
- slide cylinder (3) (in the direction of the arrow «b»);
- pull the lock (1) (in the direction of the arrow «A»).
The gear selector cable is then in position for adjustment.
Press on the plastic lever (5) in the direction of the stopper (4) and release the rope.
Install the cable in the area «With» and lower the lever (5).
Fasten the gear selector (2).
Stop lock keys (1).
Check all gear changes.
Reinstall the center console.