2. Each of the lamps is in its cartridge. To replace the lamp, pull the cartridge out of its mounts. The lamps are single filament and have a bayonet fit in the sockets. To remove the lamp, press it, turn it counterclockwise and pull it out of the socket (see photo).
3. Install a new lamp in reverse order. Upon completion, check the operation of the lights.
Replacing license plate light bulbs on Estate models
1. If the lamp is on the bumper, pry it off and remove it from the bumper so that the lamp can be replaced.
2. If the lantern is installed on the tailgate, unscrew the 2 fixing screws and remove the lantern. Disconnect the lens from the cartridge, pull out the old lamp and install a new one (see photo).
3. Installing the lantern in place is done in the reverse order.