Glow candles
1. Check that the ignition is off.
2. Remove the air cleaner with air channels (see section 3).
3. Remove the plastic clips from the glow plug terminals (see photo.).
4. Remove the nuts from the glow plug terminals. Disconnect the main supply wire from the appropriate spark plug. Disconnect the connecting wire from all candles (see photo).
5. Unscrew the candles and remove them from the cylinder head (see pictures).
 |  |
6. Installation of candles is carried out in the reverse order. Tighten the spark plugs as needed (see photo).
Relay
7. The relay is located on the left side of the engine compartment near the battery (see photo). Disconnect the negative cable from the battery first.
8. Remove the bolts securing the relay to the side panel and disconnect the wiring from it.
9. The relay is installed in the reverse order.