2. After removing the engine with the box, clean them from the outside of dirt, oil, etc. using kerosene or a special cleaning agent. Wipe them clean with a clean cloth and remove the following parts:
- A. alternator with mountings (see chapter 10)
- b. starter (see chapter 10)
- V. clutch along with his crankcase (see chapter 5)
- d. distributor cover with ignition wires
- e. cylinder head cover
- e. timing cover (see chapter 1)
- and. oil dipstick and its tube.
3. Unscrew and remove the bolts securing the gearbox to the engine crankcase.
4. Before removing the last bolts, support the engine with the box and then carefully disconnect them from each other. If they "welded on" to each other, you can open them with a wooden lever.