Drive - Rope
The outer diameter of the driven disk is 200 mm
Adjustment data
Clutch pedal travel - 135 mm (minimum)
Clutch pedal free play - 10 mm (minimum)
Overhaul Data
Permissible deformation of the clutch housing gasket surface:
- Between two points more than 100 mm apart - 0.10 mm (maximum)
- Between two points less than 100 mm apart - 0.05 mm (maximum)
- Axial movement of the pinion - 0.25-0.40 mm
- Washer sizes for adjusting axial movement - 0.07, 0.15, 0.20, 0.25 and 0.50 mm
Torque (N·m)
- Clutch Pedal Pivot Bolt Nut - 27.1
- Bolts of fastening of a basket of coupling to a flywheel — 24,4
- Bolts of the outer half of the clutch housing - 9.8
- Crankshaft pulley bolt - 88.1
- Starter mounting bolts - 34.3
- Nuts of the left upper engine support bracket - 19.7
- Alternator mounting bolt - 34.3
- Auxiliary pulley bolts (M7) — 12,7
- Lower Auxiliary Pulley Pivot Bolt - 53.8
- Drain plug of the pallet - 27.1
- Bolts of fastening of a crankcase of coupling to the engine — 12,2