- turn off the ignition and disconnect the wire «masses» from the storage battery;
- remove the outside rearview mirror;
Pic. 10.110. Removing the outdoor temperature sensor: 1 - cover; A - fasteners
- release from clamps A (pic. 10.110) cover 1;
- remove the outdoor temperature sensor;
- cut the black sensor wires.
Install the sensor in the reverse order of removal, taking into account the following:
- put a thermofusible insulating sheath on the wires;
- restore the electrical connection with fusible bushings, then heat the sheath to insulate the connection;
- connect wire «masses» to the battery;
- check the operation of electrical equipment;
- initiate all electronic systems.