Headlights and taillights
Pic. 1.22. Location of the headlight and taillight ring switches: 1 - switch for side lighting, high / low beam headlights and automatic mode of operation of lighting devices; 2 - rear fog lights switch; 3 - front fog lights and rear fog lights switch
Switching on by turning ring switch 1 (pic. 1.22).
Headlights and lights are off.
Side lights are on.
Low/high beam headlights are on.
Automatic mode for lighting devices.
Switching low and high beam headlights
Switching with the dipped beam or high beam on is carried out by moving the switch forward. When switching to high beam, the high beam warning lamp comes on.
Note. After the ignition is turned off and the external lights are on, a buzzer sounds when the driver's door is opened.
Front fog lights and tail light
Switching on is carried out by turning the ring switch: forward - turn on; back - turn off. Switching on is confirmed by the indicator light on the instrument cluster.
Vehicles with rear fog lamp
Switching on is done by turning the ring switch 2 (see fig. 1.22).
The rear fog light is on.
The lantern burns simultaneously with the dipped and main beam headlights.
Vehicles with front fog lights and rear fog lights
Switching on by turning the ring switch 3 (see fig. 1.22).
Front fog lights on (rotate the ring one click forward).
They turn on when the marker lights and low beam are on.
Front fog lights and tail lights on (rotate the ring two clicks forward). They are switched on simultaneously with the side lights and the dipped and main beams.
Turn the ring switch back two clicks to turn off the rear fog lights and front fog lights.
Remember to turn them off when you no longer need them.
Direction indicators.
To turn on the right turn signal, move the switch up, to turn on the left turn, move the switch down.
At the included index of turn the control lamp blinks.
After passing the corner, the turn signal will automatically turn off.
Giving a turn signal before changing lanes
Press the switch up or down until the back pressure increases and hold in this position - the control lamp should flash simultaneously with the direction indicator.
Light signal
Move the steering column switch to the steering wheel, and the high beam indicator lamp will light up.