Front seats
Removing
1. Move the seat all the way forward.
2. Tilt the seatback forward.
3. Loosen the fixing screws (one bolt on each side) the back of the sled to the floor.
4. Move the seat all the way back.
5. Loosen the fixing screws (one bolt on each side) the front of the sled to the floor.
6. Remove the seat from the car.
Installation
Installation is made in sequence, return to removal.
Rear seat cushion (sedan models)
Removing
Raise the front part of the seat cushion, pull it forward to release it from the latches and remove it from the passenger compartment.
Installation
Installation is made in sequence, return to removal.
Rear seat back (sedan models)
Removing
1. If equipped, lower the armrest of the rear seatback and unscrew the fasteners of the armrest trim to the body.
2. Remove armrest trim.
3. Raise the seat back up to release it from the latches and remove it from the car.
Installation
Installation is made in sequence, return to removal.
Rear seat models (combi models)
Removing
1. Raise the rear of the seat cushion up.
2. unscrew the nuts (indicated by an arrow) fastening hinges to the body.
3. Remove the seat from the car.
Installation
Installation is made in sequence, return to removal.
Rear seat back (combi models)
Removing
1. Release the rear seat back lock and tilt the seat back forward.
2. unscrew the nuts (indicated by arrows) fastening the hinges of the seat back to the body and remove the seat from the passenger compartment.
3. If the rear seat backrest is in two parts, remove each part individually (the arrow indicates the location of the nuts for fastening the central part of the composite backrest of the rear seat).
Installation
Installation is made in sequence, return to removal.