Removing
1. Remove the seat belt lower anchor bolt.
2. Unfold the rear seat.
3. Working in the luggage compartment, unscrew the two screws (A) in front of the side decorative trim and retainer (IN) seat backs.
4. Remove the trunk side trim to access the bolt (IN) fastening of the inertial drum (A).
5. To unscrew a bolt of fastening of an inertial drum and to remove assembly of a drum.
6. Pull the belt through the groove in the rear shelf trim, then remove the seat belt assembly from the vehicle.
Installation
1. Installation is made in sequence, return to removal.
2. Tighten the seat belt buckle bolt very securely.