Distributor Bosch
1 - distributor cover, 2 - distributor rotor, 3 - dust cover, 4 - distributor housing, 6 - pulse generator, 7 - rotor, 8 - centrifugal regulator, 9 - vacuum regulator
Disassembly
1. Remove distributor.
2. Remove the distributor rotor and dust cover.
3. Remove upper bearing (2 bolts).
4. Remove the large ring that holds the bearing bolts.
5. Extract Node "wire-connector".
6. Remove the snap ring located on the rod.
7. Unscrew the bolts of the vacuum regulator and other fastening elements.
8. Remove the vacuum regulator.
9. Unhook the spring of the centrifugal regulator through a special hole.
10. Take out the disc.
Assembly
1. Carry out the steps in reverse order with respect to the disassembly process.
2. Install the vacuum regulator on the ledge of the disc.
3. Install distributor.