Automatic transmission type BE Peugeot 405

Specifications of automatic transmission
Since March 1988, Peugeot 405 cars with an automatic transmission ZF 4HP 14 have been on sale. The control is hydraulic and is characterized by blocking the hydrokinetic transmission, starting from a speed of 80 km / h...

Description of the design of automatic transmission
Elements of an automatic transmission 1 – case of an automatic transmission; 2 – control servomotor; 3 - filter; 4 – filter cover; 5 - oil pan; 6 – crankcase hydrokinetic transmission; 7 - differential bearing housing;...

Removal and installation of a transmission
The automatic transmission is taken from below the car. Removing 1. Remove the battery and its holder. 2. Remove the air filter and its bracket. 3. Disconnect the electrical connections, pipes and cables connected to...

Shift Control Adjustment
Shift Control Adjustment 1 - ball joint 2 – gearshift control lever 1. Remove the air filter assembly. 2. Separate ball joint (1) gear shift control (2) from the selector lever. 3. Install the selector lever all the way...

Gear selection cable — removal and installation
Selector cable Removing 1. Raise the front of the car and secure it on stands. Set selector lever to position "P". 2. To improve access, remove the battery, battery stand and unit hanger. 3. Remove center console. 4....

Selector lever — removal and installation
Selector lever Removing 1. Raise the front of the car and secure it on stands. Set selector lever to position "P". 2. Remove center console. 3. Disconnect the cable from the selector lever and the machine suspension. 4....

Cable for forced activation of the downshift
Distance measurement (X) between the protrusion on the downshift cable and the threaded end of the cable sheath 1 - cable for forced downshifting Gap measurement (b) between the protrusion on the cable for forced...

Adjusting the brake band
Attention! This operation should only be carried out if there is suspicion of incorrect adjustment or if oil leaks out. Adjusting the brake band 1 - nut, 2 - bolt 1. loosen the nut (1) and loosen the bolt (2). 2....

Removal and installation of the control servomotor
Arrangement of bolts of fastening of the operating servomotor Mounting bolts are indicated by arrows. Removing 1. Drain the oil from the automatic transmission. 2. Remove oil pan. 3. Keep the accelerator pedal depressed...

Replacement of a sealing ring of an axis of the selector
1. Remove air filter. 2. Remove the battery and its holder. 3. Disconnect the shift control cable from the selector lever. 4. Remove the automatic transmission selector lever. 5. Modify the standard flat lining in the...

Transmission heat exchanger — removal and installation
Gearbox heat exchanger 1 - coolant hose, 2 - coolant hose, 3 - heat exchanger mounting bolt, 4 - heat exchanger Removing 1. The heat exchanger is mounted on top of the gearbox housing. To access the heat exchanger,...