Shift Control Adjustment
1 - ball joint
2 – gearshift control lever
1. Remove the air filter assembly.
2. Separate ball joint (1) gear shift control (2) from the selector lever.
3. Install the selector lever all the way forward (position "R").
4. Inside the passenger compartment, set the gear lever to the position "R".
5. Easy to pull the shift control cable and change (screw-in or screw-in) position of the ball joint so that it is located opposite the ball joint of the selector lever.
6. Connect the shift control cable to the selector lever.
7. Inside the passenger compartment, move the gear lever several times from lock to lock, and then check if the car is locked in position "R".