Car clutch repair Peugeot 405

Clutch — design description
Clutch 1 - disc, 2 - driving part, 3 - release bearing, 4 - clutch release lever, 5 - release bearing bushing, 6 - control cable, 8 - support shell element Clutch (since January 1988) 1 - gearbox, 2 - clutch disc, 3 -...

Clutch specifications
Clutch disc Brand Valeo outer diameter: – TU engine 180 mm – XU engine with 8 valves 200 mm – XU engine with 16 valves 215 mm Lining type Ferodo 202 Clutch control release bearing ball, permanent contact Control with a...

Replacing the disc or the leading part of the clutch
Clutch Release Lever 1 - sleeve fastening on the ball joint 2 - flaring of the protrusions of the fastening of the sleeve on the clutch release lever The clutch is removed after removing the gearbox. Removing 1. Mark...

Clutch control adjustment
Check clutch control unit adjustment by measuring clutch pedal travel. If a new clutch cable is installed, depress the clutch pedal at least 20 times. 1. Depress the clutch pedal to the floor and measure the distance...

Clutch cable replacement
Removing 1. If necessary, to improve access, remove the air supply pipe to the engine or air filter housing. 2. Remove the battery and battery mounting pad. 3. In the engine compartment, disconnect the cable from the...

Clutch release mechanism — removal, inspection and installation
Removing 1. Remove gearbox. Shaft type 2. Disconnect bearing (indicated by an arrow) from the clutch release fork and remove the bearing from the input shaft. 3. Remove the roll pin from the drive lever, at the top of...