| Front brakes | |
| Type | Single piston caliper disc brakes |
| Disc diameter: | |
| – 1.6 and 1.8 liter engines | 260 mm |
| - other models | 283 mm |
| Brake Disc Thickness: | |
| – petrol engines 1.6 and 1.8 liters: | |
| • new | 24.0 mm |
| • minimum thickness | 22.0 mm |
| - other models: | |
| • new | 26.0 mm |
| • minimum thickness | 24.0 mm |
| Maximum disc runout | 0.05 mm |
| Brake lining thickness: | |
| – new | 13.0mm |
| – minimum | 2.0mm |
| Rear brakes with brake drum | |
| Drum inner diameter: | |
| - new | 228.6 mm |
| – maximum drum diameter after regrinding | 230.0 mm |
| Brake lining thickness: | |
| – new | 4.8mm |
| – minimum | 1.5mm |
| Maximum drum beat | 0.07mm |
| Rear disc brakes | |
| Brake disc diameter | 290 mm |
| Disc Thickness: | |
| - new | 10.0 mm |
| – minimum thickness | 8.0mm |
| Maximum disc runout | 0.05 mm |
| Brake lining thickness: | |
| – new | 11.0 mm |
| – minimum | 2.0mm |
Tightening torques, Nm
| ABS system components: | |
| – bolts of fastening of the electronic control device (ECU) | 5 |
| – regulator mount | 20 |
| – ABS sensor mounted on the vehicle wheel* | 10 |
| – a nut of fastening of an axis of the hinge of a brake pedal | 40 |
| - brake disc screw | 10 |
| Front brake caliper: | |
| – guide pin fixing bolt* | 30 |
| – suspension mounting bolts* | 120 |
| - hand brake lever | 20 |
| – nuts of fastening of a brake hose | 15 |
| – pressure regulator mounting bolts* | 20 |
| – nuts of fastening of the main brake cylinder | 15 |
| Rear brake caliper: | |
| – mounting bolt* | 50 |
| – guide pin fixing bolt* | 30 |
| - brake cylinder bolts | 10 |
| - wheel bolts | 90 |
| – Nuts of fastening of the vacuum booster of brakes | 20 |
* When screwing threaded connections, use a thread blocking compound.