Attention! Vehicles equipped with a driver side airbag have the word AIRBAG imprinted on the steering wheel chock.
Models without airbag
Removing
1. Set the front wheels to drive straight ahead.
2. Using a lever, remove the decorative trim from the center of the steering wheel.
3. Unscrew a bolt of fastening of a steering wheel.
4. Apply alignment marks to the steering shaft and steering wheel, then remove the steering wheel from the grooves of the steering shaft.
Installation
1. Installation is made in sequence, return to removal.
2. Make sure the automatic turn switch tab is in the center position.
3. Align the marks made during removal and tighten the bolt to the specified torque.
Models with airbag
Removing
1. Remove the airbag.
2. Set the front wheels to drive straight ahead.
3. Unscrew a bolt of fastening of a steering wheel and note mutual position of a steering shaft and a steering wheel.
4. Remove the electrical connector (indicated by an arrow) airbags from the mounting brackets and remove the steering wheel from the grooves of the steering shaft.
Installation
Installation is made in sequence, return to removal.