0. Disabled
1. Intermittent or automatic operation
2. Normal speed
3. Maximum speed
4. Switching on for one cycle (pressing the lever down)
To turn on the windshield washer, push the lever towards you. At the same time as the washer, the windshield wiper will also work. If the dipped headlights are on, the headlight washer will also turn on (in the presence of).
The rear window wiper is activated by turning ring A a quarter of a turn up.
Automatic windshield wiper
Depending on the equipment variant, the vehicle may be equipped with a rain sensor. If the lever is in position 1, the windshield wiper is activated automatically when drops of water fall on the glass, and the frequency of the brush strokes is adjusted depending on the intensity of precipitation. After turning off the ignition or starting the engine, the automatic mode must be turned on again. In confirmation of the inclusion of automatic mode, the wiper blades will perform one full stroke. This is necessary in order for the rain sensor to record the state of the windshield. If the sensor fails, move the lever to position 2.
Attention! Do not obstruct the rain sensor, which is located on the windshield behind the rear view mirror. When washing the car, turn off the ignition and move the lever to position 0. In winter, before turning on the automatic windshield wiper, you must wait until the windshield is completely defrosted.