Attention! Removing the hood should be done by two people with an assistant. If the old hood is installed, no adjustment is required, but before removing, mark the mounting position of the hood to guide the installation marks.
1. Open the hood.
2. Mark the mounting position of the hinges on the hood.
3. Unscrew bolts of fastening of a cowl in loops and remove a cowl, acting together with the assistant.
Attention! Place a rag between the hood and the body to prevent damage to the paintwork.
The hood is installed in the reverse order of removal.
Hood fit
Loosen the hood hinge bolts and slide it in the desired direction.
4.0 Bonnet parts
1 - hood
2 - soundproof gasket
3 - hood fastening loop
4 - hood lock
5 - hood lock bracket
6- hood opening cable
7 - tip of the hood opening cable
8 - hood lock rod
9 - hood lock latch
10 - protective pad
11 - sealing pads