Headlight adjustment — general information (Peugeot Partner I)

1. Fine adjustment of headlight beams is possible only with the help of special equipment designed for this purpose. Therefore, such work must be carried out by a Peugeot/Citroen dealer or a workshop with the appropriate equipment.

2. Each headlight assembly is equipped with a five-position beam tilt correction unit. It can be used to adjust the headlights to compensate for vehicle loading. The headlight range adjustment system is controlled by a knob located on the front panel. The regulator should be positioned as described below according to vehicle loading. The recommended controller settings are as follows:

• Position 0 / Front seats occupied (1 or 2 persons)
• Position - / Front or rear seats occupied (3 persons)
• Position 1 / Front or rear seats occupied (5 people)
• Position 2 / Front or rear seats occupied and luggage compartment fully loaded
• Position 3/Driver's seat occupied and luggage compartment fully loaded

3. If the vehicle load changes, be sure to adjust the headlight tilt.