There are the following key positions in the ignition switch:
ABOUT The steering wheel is locked. Ignition off.
Note. To lock the steering wheel, remove the ignition key and turn the steering wheel towards the curb/curb. The lock will work automatically.
The steering column is locked when the key is removed. Most electrical circuits do not work.
I The steering wheel lock has been removed. The ignition and all major electrical circuits are off. The electrical circuits of additional equipment, instruments and indicator lamps are working.
Note. To facilitate the release of the steering wheel lock, it is recommended to insert the key into the ignition lock and, before turning the key to position I, slightly shake the steering wheel from side to side.
Warning. To avoid discharging the battery, do not leave the ignition key in this position for a long time.
II Switching on the ignition.
In this key position, all electrical circuits, instruments and control lamps work. This is the position of the ignition key while driving.
Note. The same position should be selected when your vehicle is being towed.
III Turning on the starter.
Turning the key to this position engages the starter. After starting the engine, release the key, it will automatically return to position II.
Attention! When the car is moving, it is strictly FORBIDDEN to turn the key in the ignition switch to position O or remove it from the lock, as the lock will work and the car will become impossible to control.
Warning. Do not leave the key in the lock when you leave the car so that no one can use it without your permission. Do not leave children unattended in the car. When leaving the car, always apply the parking brake, and if the car is parked with the front «uphill», engage first gear, if the limber is downhill - reverse gear.
Warning. If someone tries to break the ignition lock while you are away, have your dealer check the ignition switch for proper operation before driving.
Horn switch
The switch is located under the trim on the steering wheel hub. To turn on the sound signal, press the overlay.