Car clutch repair Peugeot Partner 1

Clutch Specifications
Type - single-disk dry with a diaphragm spring and a cable drive Driven disk Diameter - 200 mm Tightening torques for threaded connections - Nm Bolts of fastening of a pressure plate assy: Models with a gasoline engine...

General information
The clutch consists of a driven plate, a pressure plate assembly, a clutch release bearing and a clutch release mechanism. All of these elements are encased in a large, cast aluminum housing that sits between the engine...

Clutch cable — removal and installation
1. The way the clutch cable is attached to the gearbox varies depending on the type of gearbox installed. On MA5 and VEZ / 5 gearboxes, the cable sheath is attached to the left engine / gearbox support bracket, and the...

Clutch pedal — removal and installation
Removing 1. Remove the battery, battery shelf, and base plate as described in chapter 5A . Depending on the model and working space, to facilitate access to the wiring on top of the transmission, remove the air filter...

Clutch assembly — removal, inspection and installation
Note. Although some modern friction materials may not contain asbestos, it is still safer to assume that asbestos is present and take appropriate precautions. Attention! Clutch wear dust deposited on clutch elements may...

Clutch release mechanism — removal, inspection and installation
Note: Refer to the asbestos dust warnings given at the beginning of paragraph 4. Removing 1. If you are not going to remove from the vehicle and separate for overhaul the engine assembly with gearbox (see relevant part...